/* * The functions in this file implement commands that perform incremental * searches in the forward and backward directions. This "ISearch" command * is intended to emulate the same command from the original EMACS * implementation (ITS). Contains references to routines internal to * SEARCH.C. * * REVISION HISTORY: * * D. R. Banks 9-May-86 * - added ITS EMACSlike ISearch * * John M. Gamble 5-Oct-86 * - Made iterative search use search.c's scanner() routine. * This allowed the elimination of bakscan(). * - Put isearch constants into estruct.h * - Eliminated the passing of 'status' to scanmore() and * checknext(), since there were no circumstances where * it ever equalled FALSE. */ #include #include "estruct.h" #include "edef.h" #if ISRCH extern int scanner(); /* Handy search routine */ extern int eq(); /* Compare chars, match case */ /* A couple of "own" variables for re-eat */ int (*saved_get_char)(); /* Get character routine */ int eaten_char = -1; /* Re-eaten char */ /* A couple more "own" variables for the command string */ int cmd_buff[CMDBUFLEN]; /* Save the command args here */ int cmd_offset; /* Current offset into command buff */ int cmd_reexecute = -1; /* > 0 if re-executing command */ /* * Subroutine to do incremental reverse search. It actually uses the * same code as the normal incremental search, as both can go both ways. */ int risearch(f, n) { LINE *curline; /* Current line on entry */ int curoff; /* Current offset on entry */ /* remember the initial . on entry: */ curline = curwp->w_dotp; /* Save the current line pointer */ curoff = curwp->w_doto; /* Save the current offset */ /* Make sure the search doesn't match where we already are: */ backchar(TRUE, 1); /* Back up a character */ #if NeWS newsimmediateon() ; #endif if (!(isearch(f, -n))) /* Call ISearch backwards */ { /* If error in search: */ curwp->w_dotp = curline; /* Reset the line pointer */ curwp->w_doto = curoff; /* and the offset to original value */ curwp->w_flag |= WFMOVE; /* Say we've moved */ update(FALSE); /* And force an update */ mlwrite ("[search failed]"); /* Say we died */ } else mlerase (); /* If happy, just erase the cmd line */ #if NeWS newsimmediateoff() ; #endif } /* Again, but for the forward direction */ int fisearch(f, n) { LINE *curline; /* Current line on entry */ int curoff; /* Current offset on entry */ /* remember the initial . on entry: */ curline = curwp->w_dotp; /* Save the current line pointer */ curoff = curwp->w_doto; /* Save the current offset */ /* do the search */ #if NeWS newsimmediateon() ; #endif if (!(isearch(f, n))) /* Call ISearch forwards */ { /* If error in search: */ curwp->w_dotp = curline; /* Reset the line pointer */ curwp->w_doto = curoff; /* and the offset to original value */ curwp->w_flag |= WFMOVE; /* Say we've moved */ update(FALSE); /* And force an update */ mlwrite ("[search failed]"); /* Say we died */ } else mlerase (); /* If happy, just erase the cmd line */ #if NeWS newsimmediateoff() ; #endif } /* * Subroutine to do an incremental search. In general, this works similarly * to the older micro-emacs search function, except that the search happens * as each character is typed, with the screen and cursor updated with each * new search character. * * While searching forward, each successive character will leave the cursor * at the end of the entire matched string. Typing a Control-S or Control-X * will cause the next occurrence of the string to be searched for (where the * next occurrence does NOT overlap the current occurrence). A Control-R will * change to a backwards search, META will terminate the search and Control-G * will abort the search. Rubout will back up to the previous match of the * string, or if the starting point is reached first, it will delete the * last character from the search string. * * While searching backward, each successive character will leave the cursor * at the beginning of the matched string. Typing a Control-R will search * backward for the next occurrence of the string. Control-S or Control-X * will revert the search to the forward direction. In general, the reverse * incremental search is just like the forward incremental search inverted. * * In all cases, if the search fails, the user will be feeped, and the search * will stall until the pattern string is edited back into something that * exists (or until the search is aborted). */ isearch(f, n) { int status; /* Search status */ int col; /* prompt column */ register int cpos; /* character number in search string */ register int c; /* current input character */ register int expc; /* function expanded input char */ char pat_save[NPAT]; /* Saved copy of the old pattern str */ LINE *curline; /* Current line on entry */ int curoff; /* Current offset on entry */ int init_direction; /* The initial search direction */ /* Initialize starting conditions */ cmd_reexecute = -1; /* We're not re-executing (yet?) */ cmd_offset = 0; /* Start at the beginning of the buff */ cmd_buff[0] = '\0'; /* Init the command buffer */ strncpy (pat_save, pat, NPAT); /* Save the old pattern string */ curline = curwp->w_dotp; /* Save the current line pointer */ curoff = curwp->w_doto; /* Save the current offset */ init_direction = n; /* Save the initial search direction */ /* This is a good place to start a re-execution: */ start_over: /* ask the user for the text of a pattern */ col = promptpattern("ISearch: "); /* Prompt, remember the col */ cpos = 0; /* Start afresh */ status = TRUE; /* Assume everything's cool */ /* Get the first character in the pattern. If we get an initial Control-S or Control-R, re-use the old search string and find the first occurrence */ c = ectoc(expc = get_char()); /* Get the first character */ if ((c == IS_FORWARD) || (c == IS_REVERSE) || (c == IS_VMSFORW)) /* Reuse old search string? */ { for (cpos = 0; pat[cpos] != 0; cpos++) /* Yup, find the length */ col = echochar(pat[cpos],col); /* and re-echo the string */ if (c == IS_REVERSE) { /* forward search? */ n = -1; /* No, search in reverse */ backchar (TRUE, 1); /* Be defensive about EOB */ } else n = 1; /* Yes, search forward */ status = scanmore(pat, n); /* Do the search */ c = ectoc(expc = get_char()); /* Get another character */ } /* Top of the per character loop */ for (;;) /* ISearch per character loop */ { /* Check for special characters first: */ /* Most cases here change the search */ if (expc == metac) /* Want to quit searching? */ return (TRUE); /* Quit searching now */ switch (c) /* dispatch on the input char */ { case IS_ABORT: /* If abort search request */ return(FALSE); /* Quit searching again */ case IS_REVERSE: /* If backward search */ case IS_FORWARD: /* If forward search */ case IS_VMSFORW: /* of either flavor */ if (c == IS_REVERSE) /* If reverse search */ n = -1; /* Set the reverse direction */ else /* Otherwise, */ n = 1; /* go forward */ status = scanmore(pat, n); /* Start the search again */ c = ectoc(expc = get_char()); /* Get the next char */ continue; /* Go continue with the search*/ case IS_NEWLINE: /* Carriage return */ c = '\n'; /* Make it a new line */ break; /* Make sure we use it */ case IS_QUOTE: /* Quote character */ case IS_VMSQUOTE: /* of either variety */ c = ectoc(expc = get_char()); /* Get the next char */ case IS_TAB: /* Generically allowed */ case '\n': /* controlled characters */ break; /* Make sure we use it */ case IS_BACKSP: /* If a backspace: */ case IS_RUBOUT: /* or if a Rubout: */ if (cmd_offset <= 1) /* Anything to delete? */ return (TRUE); /* No, just exit */ --cmd_offset; /* Back up over the Rubout */ cmd_buff[--cmd_offset] = '\0'; /* Yes, delete last char */ curwp->w_dotp = curline; /* Reset the line pointer */ curwp->w_doto = curoff; /* and the offset */ n = init_direction; /* Reset the search direction */ strncpy (pat, pat_save, NPAT); /* Restore the old search str */ cmd_reexecute = 0; /* Start the whole mess over */ goto start_over; /* Let it take care of itself */ /* Presumably a quasi-normal character comes here */ default: /* All other chars */ if (c < ' ') /* Is it printable? */ { /* Nope. */ reeat (c); /* Re-eat the char */ return (TRUE); /* And return the last status */ } } /* Switch */ /* I guess we got something to search for, so search for it */ pat[cpos++] = c; /* put the char in the buffer */ if (cpos >= NPAT) /* too many chars in string? */ { /* Yup. Complain about it */ mlwrite("? Search string too long"); return(TRUE); /* Return an error */ } pat[cpos] = 0; /* null terminate the buffer */ col = echochar(c,col); /* Echo the character */ if (!status) { /* If we lost last time */ TTputc(BELL); /* Feep again */ TTflush(); /* see that the feep feeps */ } else /* Otherwise, we must have won*/ if (!(status = checknext(c, pat, n))) /* See if match */ status = scanmore(pat, n); /* or find the next match */ c = ectoc(expc = get_char()); /* Get the next char */ } /* for {;;} */ } /* * Trivial routine to insure that the next character in the search string is * still true to whatever we're pointing to in the buffer. This routine will * not attempt to move the "point" if the match fails, although it will * implicitly move the "point" if we're forward searching, and find a match, * since that's the way forward isearch works. * * If the compare fails, we return FALSE and assume the caller will call * scanmore or something. */ int checknext (chr, patrn, dir) /* Check next character in search string */ char chr; /* Next char to look for */ char *patrn; /* The entire search string (incl chr) */ int dir; /* Search direction */ { register LINE *curline; /* current line during scan */ register int curoff; /* position within current line */ register int buffchar; /* character at current position */ int status; /* how well things go */ /* setup the local scan pointer to current "." */ curline = curwp->w_dotp; /* Get the current line structure */ curoff = curwp->w_doto; /* Get the offset within that line */ if (dir > 0) /* If searching forward */ { if (curoff == llength(curline)) /* If at end of line */ { curline = lforw(curline); /* Skip to the next line */ if (curline == curbp->b_linep) return (FALSE); /* Abort if at end of buffer */ curoff = 0; /* Start at the beginning of the line */ buffchar = '\n'; /* And say the next char is NL */ } else buffchar = lgetc(curline, curoff++); /* Get the next char */ if (status = eq(buffchar, chr)) /* Is it what we're looking for? */ { curwp->w_dotp = curline; /* Yes, set the buffer's point */ curwp->w_doto = curoff; /* to the matched character */ curwp->w_flag |= WFMOVE; /* Say that we've moved */ } return (status); /* And return the status */ } else /* Else, if reverse search: */ return (match_pat (patrn)); /* See if we're in the right place */ } /* * This hack will search for the next occurrence of in the buffer, either * forward or backward. It is called with the status of the prior search * attempt, so that it knows not to bother if it didn't work last time. If * we can't find any more matches, "point" is left where it was before. If * we do find a match, "point" will be at the end of the matched string for * forward searches and at the beginning of the matched string for reverse * searches. */ int scanmore(patrn, dir) /* search forward or back for a pattern */ char *patrn; /* string to scan for */ int dir; /* direction to search */ { int sts; /* search status */ if (dir < 0) /* reverse search? */ { rvstrcpy(tap, patrn); /* Put reversed string in tap */ sts = scanner(tap, REVERSE, PTBEG); } else sts = scanner(patrn, FORWARD, PTEND); /* Nope. Go forward */ if (!sts) { TTputc(BELL); /* Feep if search fails */ TTflush(); /* see that the feep feeps */ } return(sts); /* else, don't even try */ } /* * The following is a worker subroutine used by the reverse search. It * compares the pattern string with the characters at "." for equality. If * any characters mismatch, it will return FALSE. * * This isn't used for forward searches, because forward searches leave "." * at the end of the search string (instead of in front), so all that needs to * be done is match the last char input. */ int match_pat (patrn) /* See if the pattern string matches string at "." */ char *patrn; /* String to match to buffer */ { register int i; /* Generic loop index/offset */ register int buffchar; /* character at current position */ register LINE *curline; /* current line during scan */ register int curoff; /* position within current line */ /* setup the local scan pointer to current "." */ curline = curwp->w_dotp; /* Get the current line structure */ curoff = curwp->w_doto; /* Get the offset within that line */ /* top of per character compare loop: */ for (i = 0; i < strlen(patrn); i++) /* Loop for all characters in patrn */ { if (curoff == llength(curline)) /* If at end of line */ { curline = lforw(curline); /* Skip to the next line */ curoff = 0; /* Start at the beginning of the line */ if (curline == curbp->b_linep) return (FALSE); /* Abort if at end of buffer */ buffchar = '\n'; /* And say the next char is NL */ } else buffchar = lgetc(curline, curoff++); /* Get the next char */ if (!eq(buffchar, patrn[i])) /* Is it what we're looking for? */ return (FALSE); /* Nope, just punt it then */ } return (TRUE); /* Everything matched? Let's celebrate*/ } /* Routine to prompt for I-Search string. */ int promptpattern(prompt) char *prompt; { char tpat[NPAT+20]; strcpy(tpat, prompt); /* copy prompt to output string */ strcat(tpat, " ["); /* build new prompt string */ expandp(pat, &tpat[strlen(tpat)], NPAT/2); /* add old pattern */ strcat(tpat, "]: "); /* check to see if we are executing a command line */ if (!clexec) { mlwrite(tpat); } return(strlen(tpat)); } /* routine to echo i-search characters */ int echochar(c,col) int c; /* character to be echoed */ int col; /* column to be echoed in */ { movecursor(term.t_nrow,col); /* Position the cursor */ if ((c < ' ') || (c == 0x7F)) /* Control character? */ { switch (c) /* Yes, dispatch special cases*/ { case '\n': /* Newline */ TTputc('<'); TTputc('N'); TTputc('L'); TTputc('>'); col += 3; break; case '\t': /* Tab */ TTputc('<'); TTputc('T'); TTputc('A'); TTputc('B'); TTputc('>'); col += 4; break; case 0x7F: /* Rubout: */ TTputc('^'); /* Output a funny looking */ TTputc('?'); /* indication of Rubout */ col++; /* Count the extra char */ break; default: /* Vanilla control char */ TTputc('^'); /* Yes, output prefix */ TTputc(c+0x40); /* Make it "^X" */ col++; /* Count this char */ } } else TTputc(c); /* Otherwise, output raw char */ TTflush(); /* Flush the output */ return(++col); /* return the new column no */ } /* * Routine to get the next character from the input stream. If we're reading * from the real terminal, force a screen update before we get the char. * Otherwise, we must be re-executing the command string, so just return the * next character. */ int get_char () { int c; /* A place to get a character */ /* See if we're re-executing: */ if (cmd_reexecute >= 0) /* Is there an offset? */ if ((c = cmd_buff[cmd_reexecute++]) != 0) return (c); /* Yes, return any character */ /* We're not re-executing (or aren't any more). Try for a real char */ cmd_reexecute = -1; /* Say we're in real mode again */ update(FALSE); /* Pretty up the screen */ if (cmd_offset >= CMDBUFLEN-1) /* If we're getting too big ... */ { mlwrite ("? command too long"); /* Complain loudly and bitterly */ return (metac); /* And force a quit */ } c = get1key(); /* Get the next character */ cmd_buff[cmd_offset++] = c; /* Save the char for next time */ cmd_buff[cmd_offset] = '\0';/* And terminate the buffer */ return (c); /* Return the character */ } /* * Hacky routine to re-eat a character. This will save the character to be * re-eaten by redirecting the input call to a routine here. Hack, etc. */ /* Come here on the next term.t_getchar call: */ int uneat() { int c; term.t_getchar = saved_get_char; /* restore the routine address */ c = eaten_char; /* Get the re-eaten char */ eaten_char = -1; /* Clear the old char */ return(c); /* and return the last char */ } int reeat(c) int c; { if (eaten_char != -1) /* If we've already been here */ return/*(NULL)*/; /* Don't do it again */ eaten_char = c; /* Else, save the char for later */ saved_get_char = term.t_getchar; /* Save the char get routine */ term.t_getchar = uneat; /* Replace it with ours */ } #else isearch() { } #endif